Envision-peripherals EN-770e User Manual

EN-770e131MY02EN-770e 053102EN-770e17 inch Flat CRT Color MonitorUser’s Manualby Envision Peripherals, Inc.www.ENVISIONmonitor.com.comBefore operating

EN-770e1031MY02EN-770eOperating InstructionsPlug & Play DDC1/2B FeatureThis monitor is equipped with VESA DDC1/2Bcapabilities according to the VES

EN-770e1131MY02EN-770eTechnical Support (FAQ)Problem Possible SolutionPower LED is not ON • Make sure the power button is ON.• Make sure the power cor

EN-770e1231MY02EN-770eAppendixSpecificationsCRT Size 17.0" (43.2 cm)11.4” (29 mm) neck0.21mm(H),0.25mm(D) dotpitch90 degree deflec-tionViewable i

EN-770e1331MY02EN-770eAppendixSpecifications (continued)Optimal Viewing Mode: 1024 x 768 x 85 HzEnvironmentalConsiderationsOperating Temp:32° to 104°F

EN-770e1431MY02EN-770eAppendixFactory Preset Timing TableStandardResolution(in pixels)HorizontalFrequencyVerticalFrequencyVGA 720 × 400 31.5KHz 70 Hz6

EN-770e1531MY02EN-770eAppendixConnector Pin AssignmentPin Number Description Pin Number Description1Red9NC2 Green 10 Ground3 Blue 11 Monitor Ground4 G

EN-770e231MY02EN-770eFor Your SafetyFCC StatementThis equipment has been tested and found tocomply with the limits for a Class B digital device,pursua

EN-770e331MY02EN-770eFor Your SafetyPrecautions• Do not use the monitor near water, e.g. near abathtub, washbowl, kitchen sink, laundry tub,swimming p

EN-770e431MY02EN-770eFor Your SafetyGeneral Notes• Do not install the monitor near heat sourcessuch as radiators or air ducts.• Do not place monitor i

EN-770e531MY02EN-770eBefore You Operate the MonitorInstalling & Removing the Base

EN-770e631MY02EN-770eBefore You Operate the MonitorConnecting the Wires Using the Power Cord Supplied1. Connect the built-in video cable into the 15-p

EN-770e731MY02EN-770eBefore You Operate the MonitorConnecting the Wires Using An Optional Power Cord (Not Supplied)The power cord supplied with your m

EN-770e8EN-770e31MY02Operating InstructionsFront Panel ButtonsExit: Press this button to savechanges and close the OSD window.Brightness: Press this b

EN-770e931MY02EN-770eOperating InstructionsAdjusting the OSD Settings1. Press the MENU button to open the OSDwindow.2. Press the < or > buttons