EN-985e131MY02EN-985eEN-985e19 inch Flat CRT Color MonitorUser’s Manualby Envision Peripherals, Inc.www.ENVISIONmonitor.comBefore operating your monit
EN-985e1031MY02EN-985eOperating InstructionsPlug & Play DDC1/2B FeatureThis monitor is equipped with VESA DDC1/2B capabilities according to the VE
EN-985e1131MY02EN-985eTechnical Support (FAQ)Problem Possible SolutionPower LED is not ON • Make sure the power button is ON.• Make sure the power cor
EN-985e1231MY02EN-985eAppendixSpecificationsCRT Size 19.0" (48.3 cm)11.4” (29 mm) neck0.25mm(D), 0.21mm(H) dot pitch90 degree deflectionViewable
EN-985e1331MY02EN-985eAppendixSpecifications (continued)Optimal Viewing Mode: 1280 x 1024 @ 85 HzEnvironmental Considerations Operating Temp:32° to
EN-985e1431MY02EN-985eAppendixFactory Preset Timing TableStandardResolution(in pixels)Horizontal FrequencyVertical Frequency VGA 720 × 400 31.5 kHz 70
EN-985e1531MY02EN-985eAppendixConnector Pin AssignmentPin Number Description Pin Number Description1Red9NC2 Green 10 Ground3 Blue 11 Monitor Ground4 G
EN-985e231MY02EN-985eFor Your SafetyFCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, purs
EN-985e331MY02EN-985eFor Your SafetyPrecautions• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming
EN-985e431MY02EN-985eFor Your Safety General Notes• Do not install the monitor near heat sources such as radiators or air ducts.• Do not place monitor
EN-985e531MY02EN-985eBefore You Operate the Monitor Installing & Removing the Base
EN-985e631MY02EN-985eBefore You Operate the MonitorConnecting the Wires Using the Power Cord Supplied1. Connect the built-in video cable into the 15-p
EN-985e731MY02EN-985eBefore You Operate the MonitorConnecting the Wires Using An Optional Power Cord (Not Supplied)The power cord supplied with your m
EN-985e8EN-985e 31MY02Operating InstructionsFront Panel ButtonsExit: Press this button to save changes and close the OSD window.Brightness: Press this
EN-985e931MY02EN-985eOperating InstructionsAdjusting the OSD Settings1. Press the MENU button to open the OSD window.2. Press the < or > buttons
Comments to this Manuals