EN-780e131MY02EN-780e_31MY02EN-780e17 inch Flat CRT Color MonitorUser’s Manualby Envision Peripherals, Inc.www.ENVISIONmonitor.comBefore operating you
EN-780e1031MY02EN-780eOperating InstructionsPlug & Play DDC1/2B FeatureThis monitor is equipped with VESA DDC1/2Bcapabilities according to the VES
EN-780e1131MY02EN-780eTechnical Support (FAQ)Problem Possible SolutionPower LED is not ON • Make sure the power button is ON.• Make sure the power cor
EN-780e1231MY02EN-780eAppendixSpecificationsCRT Size 17.0" (43.2 cm)11.4” (29 mm) neck0.25mm(D),0.21mm(H) dotpitch90 degree deflec-tionViewable i
EN-780e1331MY02EN-780eAppendixSpecifications (continued)Optimal Viewing Mode: 1024 x 768 @ 85 HzEnvironmentalConsiderationsOperating Temp:32° to 104°F
EN-780e1431MY02EN-780eAppendixFactory Preset Timing TableStandardResolution(in pixels)HorizontalFrequencyVerticalFrequencyVGA 720 × 400 31.5 kHz 70 Hz
EN-780e1531MY02EN-780eAppendixConnector Pin AssignmentPin Number Description Pin Number Description1Red9NC2 Green 10 Ground3 Blue 11 Monitor Ground4 G
EN-780e231MY02EN-780eFor Your SafetyFCC StatementThis equipment has been tested and found tocomply with the limits for a Class B digital device,pursua
EN-780e331MY02EN-780eFor Your SafetyPrecautions• Do not use the monitor near water, e.g. near abathtub, washbowl, kitchen sink, laundry tub,swimming p
EN-780e431MY02EN-780eFor Your SafetyGeneral Notes• Do not install the monitor near heat sourcessuch as radiators or air ducts.• Do not place monitor i
EN-780e531MY02EN-780eBefore You Operate the MonitorInstalling & Removing the Base
EN-780e631MY02EN-780eBefore You Operate the MonitorConnecting the Wires Using the Power Cord Supplied1. Connect the built-in video cable into the 15-p
EN-780e731MY02EN-780eBefore You Operate the MonitorConnecting the Wires Using An Optional Power Cord (Not Supplied)The power cord supplied with your m
EN-780e8EN-780e31MY02Operating InstructionsFront Panel ButtonsExit: Press this button to save changes andclose the OSD window.Brightness: Press this b
EN-780e931MY02EN-780eOperating InstructionsAdjusting the OSD Settings1. Press the MENU button to open the OSDwindow.2. Press the < or > buttons
Comments to this Manuals